November 8, 2013
A new Quick Link (QL) calibrated spectral gamma probe is now available from Terraplus. The QL40-SGR measures both the total counts and concentration estimates for K, U and Th. It is calibrated using a full spectrum analysis, which is an efficient method to derive nuclide concentrations by utilizing virtually all of the spectral data present.
October 18, 2013
Terraplus is pleased to introduce the ABI-40-2G Acoustic Televiewer. The ABI-40-2G has
improved hardware that allows users to log at faster speeds, receive higher resolution and an improved
signal/noise ration to obtain better results in adverse borehole conditions. Additional improvements include a
rugged acoustic head to increase reliability and to prevent coax failure, a "behind PVC" mode to record the image
of the borehole wall behind a PVC casing, as well as refined algorithms for processing in real time reflected
ultrasonic signals for both open and cased hole applications.
October 1, 2013
Terraplus is pleased to announce that we have added the new Easy Locator HDR to our rental pool. The Easy Locator HDR (High Dynamic Range) is a ground penetrating radar (GPR) system that has been optimized for utility locating. Its improved technology offers a significantly better depth penetration, higher resolution than its predecessor and a new zoom capability.
September 9, 2013
We would like to announce that a split and full core correction is now available for the
KT-10 v2, KT-10 Plus v2, KT-10 C, KT-10 S/C and KT-10 Plus S/C. This capability can be added to any of
these meters by upgrading the unit's firmware using the GeoView software.
In addition, an optional extended conductivity measurement range is now available for the KT-10 C, KT-10 S/C and KT-10 Plus S/C. By purchasing this upgrade, users will extend their meter's conductivity
measurement range to 1 - 200,000 S/m.
September 6, 2013
We have added to our rental pool a Time Domain EM (TDEM) System consisting of a
GDP-3224 Multi-Function Geophysical Receiver, ZT-30 ZeroTEM Transmitter, XMT-32 Transmitter Controller and a TEM-3 Magnetic Antenna.
The GDP-3224 is an integrated 24-bit multi-channel TDEM receiver which can be expanded for a variety of
different applications including CSAMT and MT. The ZT-30 is a battery powered transmitter for TDEM
September 3, 2013
Terraplus is pleased to announce that we have added the Elrec Pro with Full Wave Form
Recording and the I-Full Waver to our rental pool. The Elrec Pro has been upgraded to include the full wave form recording to allow users log the time series voltages received by the receiver. The I-Full Waver is a separate unit that allows users to record the current wave forms supplied by a transmitter. The benefit of recording both time series voltages and current is that it provides greater flexibility in analyzing the data so that noise can be identified and removed.
August 21, 2013
Quick Link Logging Tools are a new line of stackable logging tools that allow users to customize tool stacks for specific applications. Quick Link (QL) tools also increase logging productivity as users can collect multiple different types of measurements in one pass. What's more, all quick link tools can be operated as stand alone probes. Click here for the full line of QL tools.
August 9, 2013
Terraplus has created a KT-10 Model Comparison Chart as a visual aid to help describe the various features and capabilities that are available with the ten different KT-10 models. To review the chart, click here.
April 16, 2013
The new generation Easy Locator HDR (High Dynamic Range) is now available from Terraplus. Its technology has been optimized for utility locating and offers a significantly better depth penetration and higher resolution than its predecessor.
March 3, 2013
A rectangular sensor coil is now available for the
KT-10 Plus v2, KT-10 C, KT-10 S/C and KT-10 Plus S/C.
A benefit of the rectangular coil is that it allows users to measure cores with small or medium diameters in the core box. The standard circular coil is still available for users measuring rock samples, outcrops and cores.
February 29, 2013
Three new induced polarization
(IP) full wave recorders are now
V-Full Waver two channel
distributer receiver, the
I-Full Waver to accurately
measure and log the IAB injected
current, and the
Elrec Pro receivers can be
upgraded to include the Full
Wave Form capability.
February 14, 2013
Terraplus is pleased to announce that we have added the Q40RES-1000-IP Induced Polarization/Resistivity Probe to our rental pool. Users can configure ten time windows during the chargeability decay to characterize the IP response. The Q40RES-1000-IP is a quick link (QL) probe which means it can be stacked with other QL probes to allow users to take different measurements in one log. It can also be run as a stand alone probe.
January 31, 2013
Terraplus is pleased to introduce the Gyro Shot Gyroscopically-Oriented Borehole Survey Tool and the MI5 Digital Borehole Survey Tool. Both tools measure the inclination and azimuth of a borehole, but the Gyro Shot, with its tri-axial gyroscope, is able to run inside the drill rods or in a highly magnetic environment. We rent and sell both systems.
January 18, 2013
The Syscal Junior and Syscal R1 Plus Resistivity Meters are now available with two simultaneous measurement channels, allowing users to increase their productivity in the field. This second channel is particularly useful in an ERT configuration as both the new Syscal Junior and Syscal R1 Plus can be used in 24, 48 or 72 electrode imaging system. Both resistivity meters are now also equipped with a larger LCD screen and a user initiated automatic calibration for quality control.
December 19, 2012
We are pleased to announce that we have added a new marine seismic system to our list of products: the GeoEel Solid Digital Marine Streamer. The GeoEel Solid Solid Marine Streamer has superior electronics with a solid active section design that delivers high
quality data. Separate 8-channel modules coupled with a unique slim active section design yield ultra-low towing noise levels and are largely immune to electronic interference, leakage and ground loops that plague analog streamers. The small diameter solid design (only 44.5 mm) makes the GeoEel Solid Digital Marine Streamer easy to deploy and transport.
November 30, 2012
We would like to announce that a number of new features have been added to the KT-10 C, KT-10 S/C and KT-10 Plus S/C. One such feature is the ability to input depth information to correlate every core measurement to its depth. In addition, users now have the flexibility to obtain measurement results in either SI or CGS units for magnetic susceptibility (only applicable for the KT-10 S/C and KT-10 Plus S/C), and S/m or Î©.m for conductivity. Three conductivity reference pads are also now available for measurement verification. These reference pads are available are available in low, medium and high conductivity ranges.
October 12, 2012
3D Vision is a concrete imaging software that allows users to import, process and visualize 3D ground penetrating radar (GPR) projects using a standard PC. Specifically developed to replicate and enhance the 3D Grid Project functionality of the CX Concrete Imaging System, this software offers an easy way to manage 3D Grid Project data collected with the CX system or the XV11 Monitor.
Features within this software allow users to look down 'through' the survey area to identify targets at different depths and running in different directions. A very useful aspect of this software is the ability to enable a 'drawing tool' to highlight targets within the investigated area, which can be marked on the ground surface and approved for excavation.
September 24, 2012
The next generation of magnetic susceptibility meters are now available from Terraplus. The KT-10 v2 and KT-10 Plus v2 have improved electronics which give these magnetic susceptibility meters additional capabilities that their predecessors did not possess, such as the ability to input depth correlation information, switch measurement results form SI to CGS units and an increased memory capacity. The KT-10 v2 and KT-10 Plus v2 can now also be upgraded to a KT-10 S/C or KT-10 Plus S/C Magnetic Susceptibility/Conductivity Meter. In addition to these new capabilities, the KT-10 v2 and KT-10 Plus v2 retain the same benefits offered by its predecessors such as accurate measurements, Bluetooth communication and data management/visualization software for the PC.
August 13, 2012
Terraplus is pleased to introduce the DC-5150 Borehole Video Surveying System. The DC-5150 provides a comprehensive, detailed survey of water wells, boreholes, underground storage tanks and mine shafts measuring 3"-30" in diameter up-to depths of 5,000 feet. In addition to the standard downhole view, it offers a side-view perspective with continuous 360Â° rotation. The DC-5150 can be used with a range of winches for different depth capabilities. Please contact us for additional information.
August 8, 2012
Terraplus is pleased to announce that we are adding a new instrument to the KT-10
family of products: the KT-10 C Conductivity Meter. The KT-10 C is a handheld meter that can
measure the conductivity of rock samples or drill core. Its measuring range is from 1 S/m to 10,000
S/m and is extendable to 100,000 S/m in PIN mode. This instrument has additional features such as
Bluetooth wireless communication, wireless data transfer and data visualization software. The KT-10
C can also be upgraded, via the internet, to a KT-10 S/C Magnetic Susceptibility/Conductivity Meter
or a KT-10 Plus S/C Magnetic Susceptibility Meter/Conductivity Meter.
July 25, 2012
Terraplus is pleased to announce that we have added the Shear Wave Borehole Geophones to our line of products which we distribute. The Shear Wave Borehole Geophones are designed for shallow seismic velocity measurements. They are applicable to a wide variety of shallow surveys including shothole logging, downhole shear wave measurements, and static corrections for petroleum shear-wave reflection surveys, cross-hole, tomographic, seam wave, and shallow VSP surveys for coal, minerals and rock mechanics. This tool may be used in soft-wall, cased or uncased holes.
July 18, 2012
We have just added the HFP-2293 Heat-Pulse Flow Meter Probe to our rental pool. The HFP-2293 Heat-Pulse Flow Meter Probe is designed to measure low flow rates within a borehole. The HFP-2293 has a measuring range of 0.113 L/min to 3.785 L/minute (or 0.03 gal/min to 1.0 gal/min). The HFP-2293 also comes with MSHeat: a Windows based acquisition software. With MSHeat, individual heat-flow wave forms can be saved, and text files with depth and flow rate can be imported into WellCAD for a histogram-type presentation.
In addition to the HFP-2293 Heat-Pulse Flow Meter Probe, we have added the SeisImager/SW Surface Wave Analysis Software to our rental pool. The SeisImager/SW is a post-processing software available for the Geode, ES-3000 and StrataVisor NZ Seismograph. This geotechnical software is particularly useful for the following applications: Vs30/Vs100 site classification, foundation engineering, void detection, as well as in-fill and landfill investigation.
April 26, 2012
is pleased to introduce the
KT-10 Plus S/C Magnetic Susceptibility/Conductivity Meter. The KT-10
Plus S/C can simultaneously measure the magnetic susceptibility and conductivity of samples or drill core; as well as the
ability to only measure either magnetic susceptibility or conductivity. The KT-10 Plus S/C also has the
capability to obtain the
concentration estimate of iron ore in real time. We have also added the
Meter to our rental pool.
April 23, 2012
has now added the
QL40-ABI Acoustic Borehole Imager
to its rental pool.
This tool generates a 3D image of the borehole wall by transmitting
ultrasound pulses and recording
the amplitude and the travel time of the reflected signal. With its
Quick Link capability, the QL40-
ABI can be combined with other logging tools of the QL product line to
build tool strings. It can also
be operated as a stand alone tool.
April 16, 2012
RS-125 Spectrometer and the
RS-230 BGO Spectrometer are now
available with larger memory. The memory for both spectrometers has been increased
from 2 MB to 4 MB, allowing a user to store 345,000 scan total count measurements, more
than 4,000 scan and assay readings, and more than 500 assay-spectrum only readings.
April 10, 2012
The Elrec Pro Switch 48 Imaging IP and Resistivity System is now
available offering high productivity for dipole-dipole, gradient or extended poly-pole
arrays. The Elrec Pro can also be delivered in a 24-72-96 or 120 electrode switching configuration.
Current owners of Elrec Pro receivers (as long as their units have the
appropriate connector) can add this capability by renting an external Switch Pro 48 IP and Resistivity
Imaging module which is available in our rental pool.
Additional Switch Pro modules can be connected to the Elrec Pro Switch
48 Receiver to extend its number of electrodes for large 3D investigations.
March 6, 2011
is pleased to introduce the new
KT-10 S/C Magnetic Susceptibility/Conductivity Meter. The KT-10S/C
measures simultaneously the Magnetic Susceptibility and Conductivity on
either samples or core. It is a Dual Frequency System helping the end
user to separate better the magnetic susceptibility from conductivity in
specific measurements. The KT-10 S/C standard configuration includes an
Android Application for Real Time Profiling providing as well the
ability of adding text notes on your Smart Phone which text is
automatically stored on your KT-10 S/C. The standard
Plus can be upgraded into a KT-10 S/C Combined Magnetic
is now offering an Android Application for both the
Plus Magnetic Susceptibility Meters. This KT-10 Application allows
you to display Real Time Scanner Profile on Android platform operated
Smart Phones. Their large display will show Real Time Animated Graphical
output while scanning and can be used as a KT-10 memory Data Browser to
display field measurements/records. This allows users to Pan and Zoom on
Scanner Graph. You can also add text notes with your Android Smart Phone
and transfer them automatically to the data stored on the KT-10 or KT-10
GEM-2 Hand Held Conductivity Meter bandwidth range has been
increased from 300 Hz to 96 KHz. This broadband system allows the
operator to use multiple frequencies, external GPS and Real Time
Profiling with a PDA/IPaq through Bluetooth. Furthermore, data are
stored in the internal memory as well as on the SD Card.
have now added the new
Magnetic Susceptibility Meter to our Rental Pool. The KT-10 Plus is
able to measure iron ore samples and cores up to 10 SI units while
providing all the benefits offered by the KT-10. With this extended
range and the appropriate calibration curves, it is now possible to
obtain the concentration estimate of iron ore directly from the KT-10
Plus. This allows the operator to speed up the screening of samples to
be sent to the lab for chemical assay.